|
Transfer-metallization base film |
|
|
Performance characteristics:
Surface flatness, good thermal stability, high tensile strength;
Depending on the quality requirements of the final product, can be repeated once or several times.
Typical Properties::
|
Project |
Unit |
Typical values |
Test methods |
|
Thickness |
μm |
20 |
DIN 53370 |
|
Tensile strength（MD/TD） |
MPa |
230/230 |
ASTM D 882 |
|
Elongation at break（MD/TD） |
% |
130/120 |
ASTM D 882 |
|
Elastic modulus（MD/TD） |
MPa |
4300/4500 |
ASTM D 882 |
|
Heat shrinkage（MD/TD）150℃,30min |
% |
1.7/0.0 |
ASTM D 1204 |
|
Haze |
% |
2.8 |
ASTM D 1003 |
Description: MD longitudinal, TD for transverse.
Description above data is only the typical value of the test data, can not be understood as guaranteed values; typical values can be appropriately adjusted according to customer requirements. |
|
|
|
